:	Apr 26, 2005

.

Disconnect the battery ground cable.

.

Drain the cooling system.

.

Remove the front LH fender splash shield.

.

Release the power steering fluid reservoir.

.

Remove the fuel fired booster heater exhaust bracket.   Remove the bolt.

.

: Before disconnecting or removing components, ensure the area around the joint faces and connections are clean. Plug open connections to prevent contamination. Disconnect the fuel fired booster heater fuel line.   Release the clip.

.

Disconnect the fuel fired booster heater inlet and outlet coolant hoses.   Release the 2 clips.

.

Remove the fuel fired booster heater.   Disconnect the 2 electrical connectors.   Remove the 3 bolts.   Release the fuel pipe from the clip.

.

Install the fuel fired booster heater.   Tighten the bolts to 10 Nm (7 lb.ft).   Connect the electrical connectors.   Secure the fuel pipe in the clip.

.

Connect the fuel fired booster heater coolant hoses.   Secure with the clips.

.

Connect the fuel fired booster heater fuel hose.   Secure with the clip.

.

Install the fuel fired booster heater exhaust bracket.   Tighten the bolt to 10 Nm (7 lb.ft).

.

Install the power steering fluid reservoir.

.

Install the fender splash shield.

.

Refill and bleed the cooling system.

.

Connect the battery ground cable.